Residential Mold Removal 773-885-8528

WAYS TO PREVENT MOLD

If you are the type of person who lives in fear of mold taking a hold in your house, then you are right to do so. The fact of the matter is that there are loads of different ways in which residential mold can begin to surface, and if you are not careful, the problem can be really troubling. You will find that there are plenty of ways in which you can get rid of it, but that is not the be all and end all, much better is to prevent it from occurring in the first place! Have a look over the following ideas as to how you can prevent mold from ever entering your home, and ensure that you don’t suffer its evils, nor have to spend age cleaning it away!

For a start, there is the fact that mold develops in damp, hot and humid places. So, if you can think of places in the home that are like this fairly often, then you should likely get to thinking about how you are going to avoid mold spores developing in those places. You will see that the bathroom is the first place that is a likely haven for mold, as the combination of hot water and poor ventilation can often mean that the room remains humid for longer than it should. Boiler rooms can be very hot as well, and if they get damp or humid then this is another problem area. Whilst these two places are very commonly warm or humid, sometimes whole houses can be damp, especially subterranean flats, and this can mean that damp and mold grow throughout the place if you are not careful.  Thus, a possible need for mold cleanup might ensue and fast!

 

With these conditions being perfect for mold to grow in, how do you prevent them? The main trick is to ensure that ventilation throughout the house is always in place, whether it be through regularly opening windows, or just installing proper ventilation into the windows, so that you don’t have to think about opening or closing them. You will likely find that the opening of windows by yourself gets less and less manageable over the winter as the coolness of the air outside makes it less comfortable, so it may well be a good idea to look into getting the installed ventilation. You will find that allowing the air to flow through the house at all times will ensure that there is much less of a chance for things to get too damp, and this ensures that you are not likely to allow the mold to spore and grow, which is a massive plus in terms of your fight against the need for mold removal.

Clothing is a place that mold can grow, and if it does start to grow in a piece of clothing, it can spread to more clothing, and even the structure of the drawer or cupboard that the clothing is stored in. You will find that after exercise and if you come in out of the rain, you should wash your clothing immediately, or at least hang the clothes in a well-ventilated area. The heat of your body combined with the damp of rain or sweat will likely lead to mold or damp if you leave the clothing bunched up. Throwing it in the laundry basket will make the problem worse, as the air won’t get to the clothing, and the mold can affect other clothes as well! Be sure to take things straight out of the washing machine to hang them up when the wash has finished, as the same issues can occur if not!  These methods can be used to prevent mold growth and the need for possible professional mold remediation or professional mold removal.

Mold Removal Chicago 773-885-8528

GOT A BAD CASE OF ATTIC MOLD IN YOUR HOME?

If you have a bad case of mold in the house, the first thing you need to do is assess the situation. Clearing out mold can be pretty easy if you have the right company and qualified experience. If this is the first time you are dealing with mold in the house, you should hire cleaning contractors for the job. Mold removal is one of those home remediation tasks that can be easy or difficult- depending on the kind of mold you are dealing with.

Inspect

The attic is one of those places in the home that is most susceptible to mold growth. Like the bathroom, the attic is usually exposed to some form of moisture or humidity. And unlike other places in the home, the attic is usually just used to store things and does not see a lot of traffic, which means it can be months on an end before a problem is discovered. One way to stay on top of any house cleaning issues is to regularly have a mold remediation company come by and inspect the attic.

Ventilate

A very crucial factor to take into account is that venting and air flow. A lot of mold infestations take root simply because of poor ventilation. Attics are usually known for inadequate ventilation, which allows fungi to breed and spread and the lack of fresh air just acts as a catalyst. When the cleaning services you hire are completed it is important to ventilate the treated area properly. All the humidity and moisture trapped inside a single space without proper ventilation is a hotspot for germs, fungi, microorganisms and the suchlike. To keep your attic mold from worsening and/ or returning you must make it a point to ventilate the area properly.

Clean

One of the most important things to realize when you discover mold in the attic is that simply removing the mold is not enough. A lot of people choose to forgo mold cleaning services in favor of homemade cleaning products such as chlorine bleach. These can actually work really well but the important thing to realize is that mold removal is not the same thing as killing/ destroying the source of the mold. Chlorine bleach and other mild cleaning solutions cannot actually penetrate through layers of wood/ boards/ fabric in the attic and thoroughly uproot the mold. As a result, even though the mold will be removed from the surface and all visible traces of it will be gone, it is likely that the spores will remain intact. If the mold spores are not killed, the mold will return and all you will have is temporary relief.

Homemade cleaning solutions are ineffective for killing mold. You can either call in the professional mold remediation company or purchase strong mold-killing industrial cleaners to make sure that the mold is removed right from the root. To actually remove attic mold you need to use more advanced techniques and products. Cleaning companies usually use equipment with a high efficiency HEPA vacuum cleaner to get rid of mold completely. Another common technique is to fully remove the affected regions and dispose of them carefully, and then replace them with newer boards/ wood/ upholstery. This way you’re completely getting rid of the affected area and removing the problem as a whole. Proper disposal is the key to this step because you must make sure that the mold does not come into contact with other surfaces in the house.

On the whole, when it comes to bad cases of attic mold it is recommended that you hire a professional mold cleanup company to take care of the problem.

Mold Removal Services 773-885-8528

How to Keep Mold Out of Shared Office Spaces

Mold is not something that you want to take lightly. If left unchecked, it can become a serious health hazard. Therefore, you need to know what you can do to prevent mold from forming or get rid of it if it does surface.

Keep the Areas Dry

Mold typically forms in moist environments. If you live in an area that routinely gets hot or humid weather, you should look into buying a dehumidifier or an air conditioner that will take the moisture out of the air and deposit it back outside. Make sure that you periodically check the unit itself to ensure that condensation is not forming within it and getting disbursed on or inside the walls of the building, nor that it is depositing mold spores from non-cleaning and/or maintenance.

Keep Shower Doors Open When Not in Use and Fans Operating

If you have a showering area in the office, you should make sure that it is cleaned and kept as dry as possible. Fans should be installed that will wick away moisture and circulate the air after someone takes a shower. Cleaning the shower walls and floors reduces the odds that mold or any other type of fungus is allowed to grow and spread, thus avoiding the need for mold remediation efforts.

Clean Out the Refrigerator

The refrigerator is one the easiest places within an office for mold infestation to form. This is because people are not always good about throwing out food or keeping the refrigerator clean. Over time, mold can form on the surfaces of the refrigerator and may seep out of the refrigerator as it defrosts and solids turn to liquids that can run down the fridge door and onto the floor.

How to Deal With Mold

It is never a certainty what type of mold in its various forms may be lurking there on your premises, especially if detected after festering for a while.  It’s always a good idea to get a professional mold removal company to come in and either remove it or take samples to find out what steps should be taken to eradicate the mold properly.  Don’t try to deal with it yourself.  Bleach can only irritate the situation and cause the mold contaminants to return more vicious than before.  A proper mold cleanup and the right products can do wonders for keeping it from returning.

Make Sure to Cover Your Face

If you are dealing with mold, make sure that your face is completely covered. This is because mold spores could get into your mouth and make their way to your lungs. Your breathing could become labored or you could start having an asthma attack. Continued exposure to mold could lead to other health problems that result in a trip to the emergency room or being put on an extended cycle of antibiotics.

In most cases, mold is nothing more than a mild annoyance. As long as it is taken care of swiftly, there is no reason why it should interfere with your ability to work. However, if you notice that you are having trouble breathing or have become otherwise ill, do not hesitate to seek medical attention and look into ways to get rid of the mold for good by a trained professional who is certified in mold remediation, mold removal and mold cleanup.

Mold Removal Chicago 773-885-8528

REMOVING MOLD FROM CARPETING

Mold can be very dangerous in a home or building, especially if you have had mold growing in your walls or even within your carpet for years.  Because mold is dangerous and can be potentially fatal, it is imperative to get rid of mold from your home or building as soon as possible.  Early detection and fast removal and elimination is in order.

Begin the process of getting rid of the mold from your home or building by assessing your current situation and determining how much mold damage you have within carpet throughout different areas of the facility. Determining how extensive your mold problem is will help to determine the best methods of cleaning and treating the mold completely.

Finding the source of any mold spots you locate is a way for you to begin ridding it from the carpet itself. Once you have located, it is best to get a professional assessment immediately.  There are many local mold remediation companies that might offer the service for a nominal fee.

It is also important to stop mold spores and mold itself from traveling throughout your property within your air ducts and ventilation system. Proper vent covering during the mold removal process will prevent mold spores from migrating to other areas.

The antimicrobial that will be used best in your facility can be determined by an industry certified professional.  Always ask the type of product that is being used, and if there are any harmful effects caused after such product recommendations.  Any mold remediation process will need to use some sort of contaminant prevention chemical to fully kill the existing mold.

It is important to have the carpet pulled back and thoroughly checked to make sure that the backing and the subfloor alike is not carrying in mold deposits, spots or any type of hidden mold activity.  Once the area is carefully examined and all mold spores are removed, it is an excellent idea to have an air quality test done to ensure all the mold or contaminants have been properly eliminated.

* If you are dealing with an excessive mold issue, have asthma or a compromised immune system, or a toxic mold in your home, you should avoid cleaning or removing it yourself and contact a professional mold remediation company.